通風管道加工系統布局要減小阻力

發布人：http://www.bnlfans.net   發布時間：2022-05-09 20:34:43

通風管道自問世以來，就以非常迅猛的姿態一下子席卷整個市場。這不僅因?yàn)槠渥陨砉δ艿耐怀鎏攸c(diǎn)，也因?yàn)槠涞土姆浅＿m合推廣并普及，因而非常受到諸多廠家的歡迎。下面濟南通風管道加工廠家為大家介紹就是通風管道質量判斷的四大標準，

Since its inception, the ventilation duct has swept the whole market with a very rapid attitude. This is not only because of the outstanding characteristics of its own functions, but also because its low price is very suitable for promotion and popularization, so it is very popular with many manufacturers. Next, Jinan ventilation pipe processing factory will introduce the four standards for judging the quality of ventilation pipes,

通風設備我們都很熟悉，通風管道是連接風機、空氣處理設備和進風口的管道，是通風設備的重要組成部分。設計通風管道時，應注意通風管道中的阻力，設應盡可能減小阻力。.設計通風管道時，彎頭應盡可能少，兩個彎頭之間的距離應較大。當兩彎頭之間的距離為管徑的3倍時，阻力增加約80%。如果是5倍，只會增加30%。自通風管道問世以來，由于其自身的特點和低價席卷了整個市場，受到許多制造商的歡迎。在使用中，要學會該學會維護和清潔通風管道，以便更好地發揮自己的作用。實用：這點應該是重要的一點,也是客戶們所追求的一點,只有達到了工程的效果,這樣客戶才能認可我們的產品。

We are all familiar with ventilation equipment. Ventilation pipe is the pipe connecting fan, air handling equipment and air inlet. It is an important part of ventilation equipment. When designing the ventilation duct, pay attention to the resistance in the ventilation duct and reduce the resistance as much as possible When designing the ventilation duct, the elbows shall be as few as possible, and the distance between the two elbows shall be large. When the distance between two elbows is 3 times of the pipe diameter, the resistance increases by about 80%. If it is five times, it will only increase by 30%. Since the air duct came out, it has swept the whole market due to its own characteristics and low price, and has been welcomed by many manufacturers. In use, we should learn how to maintain and clean the ventilation duct, so as to better play our role. Practical: this should be an important point, which is also what customers pursue. Only when the effect of the project is achieved, can customers recognize our products.

1、通風管道加工系統布局要減小阻力。

1. The layout of ventilation duct processing system shall reduce the resistance.

2、不同含塵氣體性質不同，則凈化的分段處理應不同，當污染源多時可以集中在一個凈化系統中，也可分為幾個系統，但出現污染物混合會引起燃燒、爆炸危險、不同溫度和濕度的氣體，混合后出現管道內結露、粉塵或氣體性質不同，影響回收或凈化效率的。、

2. If the properties of different dusty gases are different, the segmented treatment of purification should be different. When there are many pollution sources, they can be concentrated in one purification system or divided into several systems. However, the mixing of pollutants will cause combustion, explosion hazards, gases with different temperatures and humidity. After mixing, the condensation, dust or gas properties in the pipeline are different, which will affect the recovery or purification efficiency

3、管道加工系統布局中要保證整體系統的漏損小，確保吸塵口的有足夠的風量。

3. In the layout of the pipeline processing system, the leakage of the whole system shall be small, and sufficient air volume at the suction port shall be ensured.

以上就是為大家介紹的有關濟南通風管道的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.bnlfans.net

The above is the detailed introduction of Jinan ventilation duct. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.bnlfans.net