不銹鋼通風管道安裝注意事項

發布人：http://www.bnlfans.net   發布時間：2022-11-09 19:35:00

在由板材變成螺旋風管成品的過程中，生產廠家、安裝公司、業主都是各司其責，相互之間的合作緊密性不高，因而在實際操作過程中存在的問題很多都不能得到科學地解決，使得優良的板材在被制作成螺旋風管后未必能充分發揮其優良的性能，從而嚴重地制約了空調系統和目標的實現。

In the process of turning the plate into a finished spiral air duct, the manufacturers, installation companies and owners are all responsible for their own work, and the cooperation between them is not very close. Therefore, many problems in the actual operation process can not be solved scientifically, which makes it impossible for excellent plates to give full play to their excellent performance after being made into spiral cyclone tubes, which seriously restricts the realization of energy conservation and environmental protection goals of the air-conditioning system.

不銹鋼板的強度要比普通鋼板高，用不銹鋼板咬口前，要作成形試驗，避免使設備*負荷作業，形成過度磨損或機械事端。由于鋁板塑性差，咬口成形時容易開裂，施工前也要作成形試驗，同時，因鋁板缺乏彈性，鋁板風管不能進行按扣式咬口。

The strength of stainless steel plate shall be higher than that of ordinary steel plate. Before seaming with stainless steel plate, forming test shall be carried out to avoid excessive wear or mechanical accidents caused by equipment * load operation. Due to the poor plasticity of the aluminum plate, it is easy to crack during the forming of the seaming. The forming test should also be carried out before construction. At the same time, because the aluminum plate is lack of elasticity, the aluminum plate air duct cannot be seamed with a snap fit.

安裝注意事項

Installation precautions

1、鉚釘脫落：按工藝操作、鉚后檢查、使用合適的螺釘。

1. Rivet falling off: operate according to the process, check after riveting, and use appropriate screws.

2、風管法蘭連接不方：用方尺找正使法蘭與直管棱垂直，管口四邊翻邊適量。

2. Improper connection of air duct flange: use a square ruler to align the flange to make it perpendicular to the straight pipe edge, and the four sides of the pipe orifice are properly flanged.

3、法蘭翻邊四角漏風：管片壓口前到倒角、咬口重疊處翻邊時鏟平、四角不應出現豁口。

3. Air leakage at the four corners of flange flanging: the flanging from the front of the segment pressure opening to the chamfer and overlap of the undercut shall be leveled, and the four corners shall be free of cracks.

以上就是為大家介紹的有關濟南通風管道的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.bnlfans.net

The above is a detailed introduction to the ventilation pipes in Jinan. I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.bnlfans.net