通風管道的類型有哪些

發布人：http://www.bnlfans.net   發布時間：2022-11-01 14:21:01

通風管道的類型有很多種，不同的類型與空調進行聯合使用，所發揮出來的效果也不一樣，尤其是保溫性的通風管道。所以說，我們要想進行通風管道加工，且讓它們更好的結合空調進行工作，那么，我們也要在加工之前考慮下它們的類型，這是我們確保它們作業，發揮優勢作用的好條件。

There are many types of ventilation ducts, and different types of ventilation ducts will have different effects when used together with air conditioners, especially thermal insulation ventilation ducts. Therefore, if we want to process ventilation ducts and make them work better with air conditioners, we should also consider their types before processing, which is a good condition for us to ensure their operation and play a dominant role.

我們預先組裝膠粘劑，以驗證所有的接頭是否符合準確和正確的刷膠。在大規模生產和加工之前，應進行樣品試驗。

We pre assemble the adhesive to verify that all joints meet the requirements of accurate and correct gluing. Sample test shall be conducted before mass production and processing.

集氣(煙)置一般采用整體加工，包括過濾、集油、集水等設備，多為公司制作。其外形應統一、美觀、易于清理，廚房通風中，需補充-定數里的新風，一方面可以平衡氣壓，避免廚房負壓過大，另一方面可以降低廚房內的溫度，改善工作環境。廚房排煙管道的水平段不宜太長.

Generally, the gas (smoke) collector is processed as a whole, including filtration, oil collection, water collection and other equipment, which are mostly made by the company. Its appearance should be uniform, beautiful and easy to clean. In the kitchen ventilation, fresh air within a certain distance should be added. On the one hand, it can balance the air pressure to avoid excessive negative pressure in the kitchen, on the other hand, it can reduce the temperature in the kitchen and improve the working environment. The horizontal section of the kitchen smoke exhaust pipe should not be too long

水平遠距離不應超過15m并且要有2%以上的坡度，水平末端設活接頭，以方便清理由垢。排風速度按規范不得低于10m/s以防風速過低使油著于煙道上，接排風罩的支管應設風里調節閥。就是通風管道的基本規格，我們所需要的通風管道的尺寸和大小。值得我們注意的是，在進行規格確定的時候，我們需要與空調的使用進行聯系，只有這樣，我們才能夠保證通風管道規格設定之后，能夠與空調相互連接，并發揮使用功能，完成它們的使用效果。

The horizontal distance shall not exceed 15m and shall have a slope of more than 2%. A movable joint shall be set at the horizontal end to facilitate the cleaning of dirt. The exhaust speed shall not be less than 10m/s according to the specification to prevent oil from burning on the flue due to low wind speed. The branch pipe connected to the exhaust hood shall be equipped with air inlet regulating valve. It is the basic specification of the ventilation pipe, and the size and size of the ventilation pipe we need. It is worth noting that when determining the specifications, we need to contact with the use of air conditioners. Only in this way can we ensure that after the specifications of ventilation ducts are set, they can be connected with the air conditioners, and play a role in their use.

以上就是為大家介紹的有關濟南鐵皮風管加工的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.bnlfans.net

The above is a detailed introduction to the processing of Jinan iron sheet air duct, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.bnlfans.net