工業空調的通風管道加工規范及注意事項是什么？

發布人：http://www.bnlfans.net   發布時間：2022-08-23 15:52:02

在車間通風冷卻工程中，空調通風管道的加工和安裝是一個非常重要的環節。通風管道的加工和安裝方法有一些具體的要求和規范，這是所有個人或企業都應該研究和學習的內容。那么，通風管道的加工規范是什么呢？接下來，小邊會給你一個答案，來理解它。

In the workshop ventilation and cooling engineering, the processing and installation of environmental protection air conditioning ventilation duct is a very important link. There are some specific requirements and specifications for the processing and installation methods of ventilation pipes, which should be studied and studied by all individuals or enterprises. Then, what is the processing specification of ventilation duct? Next, Xiaobian will give you an answer to understand it.

通風管加工前的注意事項：

Precautions before ventilation pipe processing:

一：規格。這里提到的規格是通風管道的基本規格，以及我們需要的通風管道的尺寸和尺寸。值得注意的是，在確定規格時，我們需要與空調的使用聯系起來。只有這樣，我們才能確保通風管道規格設置后，我們才能與空調連接，發揮使用功能，完成其使用效果。

1： Specifications. The specifications mentioned here are the basic specifications of the ventilation duct and the size and size of the ventilation duct we need. It is worth noting that when determining the specification, we need to link it with the use of air conditioners. Only in this way can we ensure that after the specification of the ventilation duct is set, we can connect with the air conditioner, give play to the use function and complete its use effect.

二：類型。通風管有多種類型。不同類型與空調結合使用，效果不同，特別是絕緣通風管。因此，如果我們想進行通風管道加工，讓它們更好地結合空調工作，那么我們也應該在加工前考慮它們的類型，這是確保它們運行并發揮優勢作用的好條件。

2： Type. There are many types of ventilation pipes. Different types have different effects when combined with air conditioners, especially insulated ventilation pipes. Therefore, if we want to process the ventilation ducts to better integrate them with the air conditioning work, we should also consider their types before processing, which is a good condition to ensure their efficient operation and play an advantageous role.

綜上所述，通風管加工前，應與空調的基本情況相結合，并注意通風管的規格和類型。不同的空調需要不同的通風管，不同的規格，不同的類型。因此，在處理通風管時，應考慮上述情況。

To sum up, before processing the ventilation pipe, it should be combined with the basic conditions of the air conditioner, and pay attention to the specification and type of the ventilation pipe. Different air conditioners require different ventilation pipes, different specifications and different types. Therefore, the above situation should be taken into account when handling the vent pipe.

通風管道加工規范：

Ventilation pipe processing specification:

1.通風管道加工時，為保證風管制作后的強度，在下料時應保留20mm鋁箔作為保護邊緣；

1. During the processing of ventilation duct, in order to ensure the strength of the duct after fabrication, 20mm aluminum foil shall be reserved as the protective edge during blanking;

2.風管應在粘接前預組合，檢查拼接縫是否緊密，尺寸是否符合要求。根據季節溫度、濕度和粘合劑的性能確定佳粘合時間。粘接后，用角尺檢查。鋼卷尺。垂直度和對角線偏差的調整應符合規定。

2. The air duct shall be pre assembled before bonding, and check whether the splicing joint is tight and whether the size meets the requirements. Determine the best bonding time according to the seasonal temperature, humidity and adhesive performance. After bonding, check with a square. Steel tape. The adjustment of perpendicularity and diagonal deviation shall meet the requirements.

3.加工通風管時，做好現場板材及預制管的成品保護工作。

3. During the processing of ventilation pipes, the finished products of on-site plates and prefabricated pipes shall be well protected.

4.連接安裝后，應檢查粘接接頭，粘接后應平整，歪斜。錯位.局部開裂，2mm以上縫隙等缺陷。

4. After the connection and installation, the bonding joint shall be checked, and the bonding joint shall be flat and skew. Dislocation, local cracks, gaps above 2mm and other defects.

5.風管支吊架間距應符合規定。

5. The spacing of air duct supports and hangers shall meet the requirements.

以上就是為大家介紹的有關濟南風管加工廠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.bnlfans.net

The above is the detailed introduction of Jinan air duct processing factory. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://www.bnlfans.net