運用通風管道減溫時要留意關鍵點?

發布人：http://www.bnlfans.net   發布時間：2021-02-24 14:56:18

隨之平均氣溫持續回暖，各大廠房里央也剛開始考慮到減溫的難題，運用通風管道開展減溫是現階段加工廠生產車間流行的減溫方法，那么運用通風管道減溫必須留意什么關鍵點呢?通風管道廠家告訴大家：

Then the average temperature continued to warm up, and the problem of temperature reduction was just beginning to be considered in the center of each factory building. It is a popular method to reduce the temperature in the production workshop of the processing plant at this stage to use the ventilation pipe to reduce the temperature. So what key points must be paid attention to when using the ventilation pipe to reduce the temperature

1、通氣減溫。因為光照房屋建筑、機械設備、身體等熱原造成必須自然通風的場地平均氣溫高過戶外。負壓風機能將房間內熱流快速排出來，讓室內溫度和外部溫度環比增長，以于生產車間內溫度上升。

1. Ventilation cooling. Because of the illumination of buildings, mechanical equipment, body and other pyrogens, the average temperature of the natural ventilation site is higher than that of the outdoor. The negative pressure fan can quickly discharge the heat flow in the room, which makes the indoor temperature and external temperature increase month on month, so that the temperature in the production workshop rises.

2、氣體流動性帶去身體發熱量，氣體流動性加快汗水揮發而消化吸收身體發熱量，進而讓身體覺得清涼，和自然風相同清涼。

2. The fluidity of the gas takes away the body's heat. The fluidity of the gas speeds up the evaporation of sweat and digests and absorbs the body's heat, thus making the body feel cool, as cool as the natural wind.

3，負壓風機只能自然通風減溫的功效，沒有致冷的作用，清涼是身體的覺得。負壓風機會降是多少溫度的叫法是愚昧的。

3. The negative pressure fan can only reduce the temperature by natural ventilation, but has no cooling effect. Cooling is the feeling of the body. How much temperature is the negative pressure wind drop? It is foolish to call it.

4、全部通風工程必須和濕簾相互配合應用，在夏天酷熱的那時候可將生產車間內溫控在29攝氏之內。但身體的清涼覺得可與空調對比，稍長期沖著濕簾的人要覺得冷而吃不消。

4. All ventilation works must be combined with the wet curtain, and the temperature control in the production workshop can be within 29 ℃ in the hot summer. But the cool feeling of the body can be compared with that of the central air conditioner. For a long time, people who rush to the wet curtain feel cold and can't bear it.

通風管道在建筑中起著重要的作用，起到通風和保持室內溫度和濕度的作用。。

Ventilation pipe plays an important role in the building, playing the role of ventilation and maintaining indoor temperature and humidity..

通風管道在很多工廠、學校等公共場所使用，主要是為了通風換氣，而在工廠中使用的通風管道不但要通風，而且還要保證車間的溫度恒定，一般車間溫度保持在25攝氏度，這是加工的需要，任何物質都有熱脹冷縮的作用，除水以外，所以在熱處理車間更是對溫度有嚴格的要求。

Ventilation pipes are used in many factories, schools and other public places, mainly for ventilation. The ventilation pipes used in factories not only need ventilation, but also ensure the constant temperature of the workshop. Generally, the temperature of the workshop is maintained at 25 ℃, which is the need of processing. Any material has the effect of heat expansion and cold contraction, except water, so it is more important to control the temperature in the heat treatment workshop There are strict requirements.

在熱處理車間安裝通風管道需要按照，車間安裝工藝圖紙進行安裝，然后根據實際需要進行調整，如果還不能保持室內溫度穩定，需要對車間溫度安裝調整器，一般的車間會以空調代替，所以我們也要為空調加裝通風設備，這些安裝的通風系統都是必不可少的。

In the heat treatment workshop, the installation of ventilation pipes needs to be carried out according to the workshop installation process drawings, and then adjusted according to the actual needs. If the indoor temperature can not be kept stable, the workshop temperature regulator needs to be installed. Generally, the workshop will be replaced by air conditioning, so we also need to install ventilation equipment for the air conditioning, and these installed ventilation systems are essential.

感謝您的閱讀，希望以上內容對您有所幫助，如想了解更多精彩內容請點擊：山東通風管道http://www.bnlfans.net。

Thank you for reading, I hope the above content is helpful to you, if you want to know more wonderful content, please click: Shandong ventilation pipeline http://www.bnlfans.net .