山東鍍鋅鐵皮風管配管圖繪制準繩及請求

發布人：http://www.bnlfans.net   發布時間：2019-07-02 17:39:21

　　對于山東鍍鋅鐵皮風管配管圖繪制準繩及請求是什么?下面由順發通風管道的人員介紹一下：

　　For Shandong galvanized iron sheet air duct piping drawing criteria and requirements? Below by the professional personnel of the ventilation pipe to introduce:

　　1) 配管圖必須標示支吊架位置，支吊架位置間距及所有材料規格必須符后規范要求及工藝規定。

　　1) Piping drawing must indicate the position of support and hanger, and the distance between supports and hanger positions and all material specifications must conform to the requirements of the later specifications and technological requirements.

　　2) 配管圖應標示起端與彎頭位置、變徑位置、管線所處軸線位置、管底標高。

　　2) Pipeline drawing shall indicate the position of the beginning and elbow, the position of the diameter change, the position of the axis of the pipeline and the elevation of the bottom of the pipe.

　　3) 配管圖應進行編號，從起點開始編號，起點一般為接口位置，相同斷面規格、相同長度節為同一號碼，除此應按順序編號。以便于組織制作施工。

　　3) Piping drawings should be numbered, starting from the starting point, the starting point is generally the interface location, the same section size, the same length section is the same number, in addition, they should be numbered in sequence. In order to facilitate the organization of production and construction.

　　4) 制作配管圖時應優先考慮彎頭與變徑滿足內外表面同心彎管要求、變徑長度要求。

　　4) The elbow and diameter change should be given priority to satisfy the requirements of concentric elbow on inner and outer surface and length of diameter change when making piping drawing.

　　山東鍍鋅鐵皮風管配管圖繪制準繩及請求-山東通風管道：http://www.bnlfans.net

　　Guidelines and Requirements for Drawing Piping Drawings of Galvanized Iron Air Pipes in Shandong Province-Shandong Ventilation Pipeline: http://www.bnlfans.net

　　5) 配管圖應按某系統黨樓層鍍鋅鐵皮風管制作進行繪制，并注明接口位置。

　　5) Piping diagram should be drawn according to galvanized iron sheet air duct of a party building in a certain system, and the location of the interface should be indicated.

　　6) 鍍鋅鐵皮風管制作制作時以配管圖為依據下達作業票，要求法蘭與鍍鋅鐵皮風管制作規格數量相配，以求得標準化互換性。

　　6) When making galvanized iron sheet air duct, the operation ticket is issued on the basis of piping chart, and the flange and galvanized iron sheet air duct are required to match the specifications and quantities in order to achieve standardized interchangeability.

　　7) 配管圖應保存以便存檔管理，未經項目經理同意不得私自更改配管圖。

　　7) Pipeline diagrams should be kept for archiving and management. Pipeline diagrams should not be altered without the consent of the project manager.

　　除了鐵皮風管之外，我們還有通風設備等等，想要了解的話，可以咨詢我們!歡迎訪問山東通風管道網站：http://www.bnlfans.net

　　In addition to iron ducts, we also have ventilation equipment and so on, if you want to know, you can consult us! Welcome to Shandong Ventilation Pipeline website: http://www.bnlfans.net